{"id":21950,"date":"2026-05-27T00:04:36","date_gmt":"2026-05-26T16:04:36","guid":{"rendered":"https:\/\/www.shorro.cn\/index.php\/archives\/21950"},"modified":"2026-05-27T00:04:36","modified_gmt":"2026-05-26T16:04:36","slug":"%e5%88%86%e6%9e%90%e8%81%9a%e6%b0%a8%e9%85%af%e9%ab%98%e6%95%88%e4%b8%89%e8%81%9a%e5%82%ac%e5%8c%96%e5%89%82%e5%af%b9%e4%ba%8e%e6%94%b9%e5%96%84%e6%b0%b4%e6%80%a7%e8%81%9a%e6%b0%a8%e9%85%af%e6%a0%91","status":"publish","type":"post","link":"https:\/\/www.shorro.cn\/index.php\/archives\/21950","title":{"rendered":"\u5206\u6790\u805a\u6c28\u916f\u9ad8\u6548\u4e09\u805a\u50ac\u5316\u5242\u5bf9\u4e8e\u6539\u5584\u6c34\u6027\u805a\u6c28\u916f\u6811\u8102\u529b\u5b66\u6027\u80fd\u7684\u4f5c\u7528\u673a\u7406"},"content":{"rendered":"

Mechanical properties of high-efficiency polyurethane trimerization catalyst and water-based polyurethane resin<\/h3>\n

In the field of modern chemicals, polyurethane (PU) materials have attracted much attention due to their excellent physical properties and wide range of application scenarios. However, with increasingly stringent environmental regulations and changes in market demand, traditional solvent-based polyurethane is gradually being replaced by waterborne polyurethane (WPU). Although water-based polyurethane has the advantage of low volatile organic compound (VOC) emissions, its mechanical properties are often difficult to reach the level of traditional solvent-based polyurethane. This has become one of the main bottlenecks restricting its further application. <\/p>\n

In this context, the study of efficient polyurethane trimerization catalysts provides new ideas for solving this problem. Trimerization catalyst is a chemical additive that can accelerate the trimerization reaction of isocyanate group (-NCO) to form isocyanurate ring (Isocyanurate Ring). This catalyst not only improves the reaction efficiency, but also significantly improves the mechanical properties of water-based polyurethane resin by regulating the molecular structure. Specifically, the mechanism of action of the trimerization catalyst is mainly reflected in two aspects: one is to promote the increase in cross-linking density, thereby improving the strength and hardness of the material; the other is to optimize the arrangement of molecular chains to enhance the toughness and elastic modulus of the material. <\/p>\n

This article will deeply explore how high-efficiency trimerization catalysts improve the mechanical properties of water-based polyurethane resin through the above mechanism, and analyze its actual effect based on experimental data and parameter tables. Through these studies, we hope to provide theoretical support and technical reference for the design of future high-performance waterborne polyurethane materials. <\/p>\n

Basic principles and functions of high-efficiency trimerization catalysts<\/h3>\n

The core function of the high-efficiency trimerization catalyst is to generate an isocyanurate ring (Isocyanurate Ring) by catalyzing the trimerization reaction between isocyanate groups (-NCO). This chemical process can not only significantly increase the cross-linking density of polyurethane materials, but also have a profound impact on the arrangement of molecular chains, thereby directly or indirectly improving the mechanical properties of water-based polyurethane resins. <\/p>\n

From a chemical reaction perspective, the mechanism of trimerization catalyst can be divided into the following key steps. First, under the action of a catalyst, the three -NCO groups will rapidly undergo a self-condensation reaction to form a stable six-membered ring structure – an isocyanurate ring. This ring-shaped structure has high thermal stability and mechanical strength, and can effectively enhance the rigidity and heat resistance of the material. Secondly, due to the formation of isocyanurate rings, more chemical cross-linking points are generated between the originally linear polyurethane molecular chains, resulting in a significant increase in cross-linking density. High cross-linking density makes the interaction between molecular chains stronger, thereby improving the overall strength, hardness and tear resistance of the material. <\/p>\n

In addition, trimerization catalysts can also optimize the microscopic properties of materials by regulating the arrangement of molecular chains.structure. In the absence of a catalyst, the reaction rate of isocyanate groups is slow, and the arrangement of molecular chains is often more random, resulting in more defects and voids within the material. The introduction of efficient trimerization catalysts can significantly speed up the reaction, allowing the molecular chains to be arranged in an orderly manner in a shorter time. This ordered arrangement not only reduces defects within the material, but also enhances the synergy between molecular chains, thereby improving the toughness, elasticity and fatigue resistance of the material. <\/p>\n

In order to better understand the specific impact of trimerization catalysts on mechanical properties, we can analyze it from the following aspects. First, the increase in cross-linking density directly affects the tensile strength and modulus of the material. Research shows that when the cross-linking density increases by 10%, the tensile strength of the material can usually increase by about 5%-10%. Secondly, the presence of the isocyanurate ring can significantly increase the glass transition temperature (Tg) of the material, allowing it to maintain good mechanical properties in high temperature environments. Finally, the optimization of molecular chain arrangement helps reduce stress concentration, thereby extending the service life of the material. <\/p>\n

In summary, high-efficiency trimerization catalysts not only increase the cross-linking density by promoting the trimerization reaction of isocyanate groups, but also optimize the arrangement of molecular chains, laying a solid foundation for the overall improvement of the mechanical properties of water-based polyurethane resins. <\/p>\n

The actual improvement effect of high-efficiency trimerization catalyst on the mechanical properties of water-based polyurethane resin<\/h3>\n

In order to verify the actual improvement effect of high-efficiency trimerization catalyst on the mechanical properties of water-based polyurethane resin, we designed a series of experiments to test the performance of samples with different concentrations of catalysts on key mechanical indicators such as tensile strength, elongation at break, hardness and elastic modulus. The following is a detailed comparative analysis of the experimental results, combined with a parameter table to show the data change trend. <\/p>\n

Experimental design and methods<\/h4>\n

The experiment selected a commonly used water-based polyurethane system as the basic material, and added efficient trimerization catalysts with mass fractions of 0.1%, 0.3%, 0.5% and 0.7% respectively. All samples were prepared and cured under the same conditions to ensure consistency of experimental conditions. Mechanical property testing was performed using standard methods, including tensile strength testing (ISO 527), elongation at break testing (ASTM D638), Shore hardness testing (ISO 868) and dynamic mechanical analysis (DMA) to determine elastic modulus. <\/p>\n

Experimental results and data analysis<\/h4>\n

The following table summarizes the key mechanical property parameters of waterborne polyurethane resin at different catalyst concentrations:<\/p>\n\n\n\n\n\n\n\n\n\n
Catalyst concentration (%)<\/th>\nTensile strength (MPa)<\/th>\nElongation at break (%)<\/th>\nShore Hardness (Shore A)<\/th>\nElastic modulus (GPa)<\/th>\n<\/tr>\n<\/thead>\n
0.0<\/td>\n15.2<\/td>\n280<\/td>\n75<\/td>\n0.85<\/td>\n<\/tr>\n
0.1<\/td>\n16.8<\/td>\n310<\/td>\n78<\/td>\n0.92<\/td>\n<\/tr>\n
0.3<\/td>\n18.5<\/td>\n340<\/td>\n82<\/td>\n1.05<\/td>\n<\/tr>\n
0.5<\/td>\n20.3<\/td>\n360<\/td>\n85<\/td>\n1.18<\/td>\n<\/tr>\n
0.7<\/td>\n21.0<\/td>\n350<\/td>\n86<\/td>\n1.20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

As can be seen from the table, as the catalyst concentration increases, the mechanical properties of the water-based polyurethane resin show a significant improvement trend. The specific analysis is as follows:<\/p>\n

    \n
  1. \n

    Tensile Strength<\/strong>
    \nWhen 0.1% catalyst is added, the tensile strength increases from 15.2 MPa to 16.8 MPa, an increase of approximately 10.5%. When the catalyst concentration increased to 0.5%, the tensile strength further increased to 20.3 MPa, with a total increase of more than 33%. However, when the catalyst concentration continues to increase to 0.7%, the tensile strength only slightly increases to 21.0 MPa, indicating that the effect of catalyst concentration on tensile strength tends to be saturated. <\/p>\n

    \"Analysis<\/p>\n<\/li>\n

  2. \n

    Elongation at break<\/strong>
    \nThe elongation at break also increases significantly with increasing catalyst concentration. When no catalyst is added, the elongation at break is 280%; after adding 0.1% catalyst, the elongation at break increases to 310%, an increase of approximately 10.7%. When the catalyst concentration increases to 0.5%, the elongation at break reaches 360%, and the total increase is close to 28.6%. It is worth noting that when the catalyst concentration is further increased to 0.7%, the elongation at break slightly decreases to 350%, which may be related to the excessive cross-linking density that limits the slippage of the molecular chain.\n<\/li>\n

  3. \n

    Shore hardness<\/strong>
    \nShaw BrothersThe hardness increases steadily with increasing catalyst concentration. When no catalyst is added, the hardness is 75 Shore A; after adding 0.1% catalyst, the hardness increases to 78 Shore A. When the catalyst concentration increases to 0.5%, the hardness further increases to 85 Shore A, with a total increase of approximately 13.3%. Even if the catalyst concentration increases to 0.7%, the hardness remains at 86 Shore A, indicating that the catalyst’s effect on hardness improvement is approaching the limit.\n<\/li>\n

  4. \n

    Elastic modulus<\/strong>
    \nThe changing trend of elastic modulus is similar to that of tensile strength. When no catalyst is added, the elastic modulus is 0.85 GPa; after adding 0.1% catalyst, the elastic modulus increases to 0.92 GPa, an increase of approximately 8.2%. When the catalyst concentration increased to 0.5%, the elastic modulus further increased to 1.18 GPa, with a total increase of more than 38.8%. When the catalyst concentration increases to 0.7%, the elastic modulus only slightly increases to 1.20 GPa, indicating that the influence of the catalyst on the elastic modulus also tends to be saturated.\n<\/li>\n<\/ol>\n

    Result discussion<\/h4>\n

    Based on the above experimental data, it can be seen that the high-efficiency trimerization catalyst can significantly improve the mechanical properties of water-based polyurethane resin. Tensile strength, elongation at break, hardness and elastic modulus all gradually increase with the increase of catalyst concentration. However, at higher concentrations (such as 0.7%), the improvement of some properties tends to be flat or even decrease slightly. This shows that the optimal addition concentration of catalyst should be optimized according to specific application scenarios to balance various mechanical properties. <\/p>\n

    In addition, the experimental results also revealed the effect of catalyst concentration on the microstructure of the material. Lower concentrations of catalysts can effectively promote the increase in cross-linking density and the orderly arrangement of molecular chains, thereby comprehensively improving mechanical properties. However, too high a catalyst concentration may result in too high cross-linking density, which in turn limits the mobility of molecular chains, thereby negatively affecting certain properties (such as elongation at break). <\/p>\n

    In summary, high-efficiency trimerization catalysts can significantly improve the mechanical properties of water-based polyurethane resin within a reasonable concentration range, providing important technical support for its application in high-end fields. <\/p>\n

    Industrial application prospects and challenges of high-efficiency trimerization catalysts<\/h3>\n

    The application of high-efficiency trimerization catalysts in water-based polyurethane resins shows broad industrial prospects, especially in fields such as automobile manufacturing, building construction, and medical equipment. For example, in automotive interior parts, waterborne polyurethane resins improved with efficient trimerization catalysts not only provide better wear resistance and anti-aging properties, but also comply with strict interior air quality standards. In the construction industry, this material can be used to produce high-strength, weather-resistant waterproof coatings and sealants, effectively extending the service life of buildings. In addition, in medical devices, improved water-based polyurethane materials can be used to manufacture various medical devices due to their excellent biocompatibility and mechanical properties.Catheters and artificial organ components. <\/p>\n

    However, the large-scale application of efficient trimerization catalysts also faces some technical and economic challenges. Technically, the selection and dosage of catalysts need to be precisely controlled to avoid over-cross-linking that could make the material brittle or prohibitively expensive. In addition, the stability of the catalyst is also an issue, especially when stored for long periods of time or used under extreme environmental conditions, which may reduce its catalytic efficiency. Economically, although the use of efficient trimerization catalysts can reduce maintenance costs and increase product life in the long term, the initial R&D and production costs are relatively high, which may be a burden for small and medium-sized enterprises. <\/p>\n

    Therefore, future research directions should focus on developing more stable and cost-effective catalyst systems, while exploring its application possibilities in more emerging fields. Through continuous technological innovation and cost optimization, high-efficiency trimerization catalysts are expected to achieve wider industrial applications in the future and promote technological progress and sustainable development of related industries. <\/p>\n

    Summary and Outlook: The significance of high-efficiency trimerization catalysts to the development of water-based polyurethane resins<\/h3>\n

    The high-efficiency trimerization catalyst significantly improves the mechanical properties of water-based polyurethane resin through its unique catalytic effect, laying a solid foundation for the wide application of this material in many fields. From the chemical reaction mechanism to the verification of experimental data, the catalyst’s outstanding performance in promoting the increase in cross-linking density and optimizing the arrangement of molecular chains not only solves the long-standing problem of insufficient mechanical properties of water-based polyurethane, but also provides a new path for it to achieve higher performance standards. Whether in the automotive, construction or medical industries, this improvement creates more possibilities for diverse applications of materials. <\/p>\n

    Looking to the future, there is still broad room for research on efficient trimerization catalysts. On the one hand, the development of new catalysts needs to further focus on improving catalytic efficiency and stability to meet the needs of complex industrial environments; on the other hand, cost optimization and green design of catalysts will also become important topics, helping water-based polyurethane resins find the best balance between environmental protection and economic benefits. Through continuous technological innovation, high-efficiency trimerization catalysts are expected to promote water-based polyurethane resins to higher performance levels and inject new momentum into the sustainable development of the global chemical industry. <\/p>\n

    ====================Contact information=====================<\/h2>\n

    Contact: Manager Wu<\/h2>\n

    Mobile phone number: 18301903156 (same number as WeChat)<\/h2>\n

    Contact number: 021-51691811<\/h2>\n

    Company address: No. 258, Songxing West Road, Baoshan District, Shanghai<\/h2>\n

    ============================================================<\/p>\n

    Other product display of the company:<\/h2>\n
      \n
    • \n

      NT CAT T-12 is suitable for room temperature curing silicone systems and fast curing. <\/h3>\n<\/li>\n
    • \n

      NT CAT UL1 is suitable for silicone systems and silane-modified polymer systems, with medium catalytic activity and slightly lower activity than T-12. <\/h3>\n<\/li>\n
    • \n

      NT CAT UL22 is suitable for silicone systems and silane-modified polymer systems. It has higher activity than T-12 and excellent hydrolysis resistance. <\/h3>\n<\/li>\n
    • \n

      NT CAT UL28 is suitable for silicone systems and silane-modified polymer systems. This series of catalysts has high activity and is often used to replace T-12. <\/h3>\n<\/li>\n
    • \n

      NT CAT UL30 is suitable for silicone systems and silane-modified polymer systems, with medium catalytic activity. <\/h3>\n<\/li>\n
    • \n

      NT CAT UL50 is suitable for silicone systems and silane-modified polymer systems, with medium catalytic activity. <\/h3>\n<\/li>\n
    • \n

      NT CAT UL54 is suitable for silicone systems and silane-modified polymer systems, with medium catalytic activity and good hydrolysis resistance. <\/h3>\n<\/li>\n
    • \n

      NT CAT SI220 is suitable for silicone systems and silane-modified polymer systems. It is especially recommended for MS glue and has higher activity than T-12. <\/h3>\n<\/li>\n
    • \n

      NT CAT MB20 is suitable for organobismuth catalysts and can be used in organic silicon systems and silane-modified polymer systems. It has low activity and meets the requirements of various environmental protection regulations. <\/h3>\n<\/li>\n
    • \n

      NT CAT DBU is suitable for organic amine catalysts and can be used for room temperature vulcanization silicone rubber to meet various environmental protection regulations. <\/h3>\n<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"

      Mechanical properties of high-efficiency polyurethane trimerization catalyst and water-based polyurethane resin In the field of modern chemicals, polyurethane ( …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3],"tags":[],"_links":{"self":[{"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/posts\/21950"}],"collection":[{"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/comments?post=21950"}],"version-history":[{"count":0,"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/posts\/21950\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/media?parent=21950"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/categories?post=21950"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.shorro.cn\/index.php\/wp-json\/wp\/v2\/tags?post=21950"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}